Home> Products> sharp point tester

{ "products": [ { "_id": "5b6b38c4dd80b30515ff7406", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Snap Tester", "description": "Application\nSnap Tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available).\nSnap tester Consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation.\nThe snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, The operator can apply a specific force and the holding force or the breaking strength can be recorded. The capability of Snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.\nRelated testers(optional order)\nThe detachment of a snap or other part may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended, such as: Small Parts Cylinder, Sharp Point Tester, Sharp Edge Tester, Button Impact Tester, etc.\n\nIncluded Accessories\nSANDOO Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) - 1 Pc\nLower Fabric Clamp, Lever Armlocking - 1 Pc\nUpper Stud Clamp - 1 Pc\nUpper Snap Clamp -1 Pc\nThree Pronged Clamp - 1 Pc\nTwo Pronged Clamp with screw - 1 Pc\nLower Grasp Button Kit - 1 Pc\nLong Nose Vise Grip - 1 Pc\nCalibration: 15 lbs Calibration Weight- 1 Pc\nSafety Goggles - 1 Pc\nRubber Ring - 5 Pcs\nCalibration Certificate - 1 Pc\nOperation Manual - 1 Pc\nStandards ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A\n\nWeight 45 Kg\nDimensions 230 x 280 x 750 mm(L x W x H)\n\nSnap Tester Manufacturer \nSnap Tester Supplier \nSnap Tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "FS", "LxWxH", "Snaps", "Toggles", "D Rings", "M S P115A", "Item Code", "ASTM F963", "Clamp 1 Pc", "hand wheel", "Rubber Ring", "fine control", "Hole Buttons", "Jean Buttons", "Resolution 2N", "small samples", "Pronged Clamp", "snap component", "specific force", "Safety Goggles", "Nose Vise Grip", "tensile testing", "upper snap clamp", "Operation Manual", "Lever Armlocking", "Push Pull Tester", "Upper Stud Clamp", " optional order ", "breaking strength", "Sharp Edge Tester", "broken small parts", "Sharp Point Tester", "Lower Grasp Button", "sharp edge testing", "SANDOO Force Gauge", "lower fabric clamp", "special attachments", "Small Parts Cylinder", "convenient operation", "Button Impact Tester", "Garments Accessories", "Standards ASTM PS79 96", "lbs Calibration Weight", "Additional Information", "Snap Tester Application", "Calibration Certificate", "prong ring attached snap", "additional testing equipment" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/5993dd2d72d9ce0a90ca8fbe.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5993dd2d72d9ce0a90ca8fbe.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-08-16T05:50:36.922Z", "updatedon": "2021-04-22T07:04:59.996Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/snap-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "", "tags": [ "Snap Tester Manufacturer", "Snap Tester Supplier", "Snap Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b38c5dd80b30515ff76ac", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Digital Elmendorf Tear Tester", "description": "Digital Elmendorf Tear Tester - Elmendorf Tear Tester - Elmendorf Tearing Strength Tester - Elmendorf - Tearing strength Tester\n\nLeveraging upon latest technology, we are engaged in manufacturing and supplying an optimum range of Digital Elmendorf Tear tester which is also known as microprocessor controlled falling-pendulum instrument and used to determine the ballistic tearing strength of textiles, plastics, paper or board.\n\nApplication:\n\nIt enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test. \n\nProcedure:\n\nThe test is carried out on a specimen composed of one or more sheets of standard Dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable Weight is used to completely tear the specimen.\n\nFeatures:\n\nWorks in accordance with all known test Standards\nMicro-printer output\nAuto specimen notching\nRepeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena, thus ensuring perfect reproducibility of the experimental conditions\nAutomatic compensation for friction and levelling errors, no slave pointer, therefore no friction, alignment and maintenance problems\n\n\nSpecifications:\n\nCapacity: 0-12800 grams\nPendulum Range: 1600, 3200, 4800, 6400, 8000, 9600, 11200, 12800, 25600\nAccuracy: 0.2% of pendulum range\nUnit: MN, CN, G KG, OZ, LB\nPower/Compressed Air 220 V / 110V 50 / 60 Hz 0.5-0.7 Mpa\nWeight 68 Kg\nDimensions 600 x 450 x 600 mm (L x W x H)\n\nDigital Elmendorf Tear Tester Manufacturer \nDigital Elmendorf Tear Tester Supplier \nDigital Elmendorf Tear Tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "kg", "Hz", "CN", "Mpa", "crack", "grams", "LxWxH ", "plastics", "friction", "textiles", "guarantees", "accordance", "cardboards", "paper bags", "e g fabrics", "Application", "optimum range", "manufacturing", "Auto specimen", "aluminum foil", "plastic films", "slave pointer", "microprocessor", "pendulum range", "test Standards", "suitable Weight", "levelling errors", "stretch materials", "latest technology", "non woven fabrics", "pneumatic specimen", "dynamic resistance", "standard Dimensions", "rapid determination", "maintenance problems", "Micro printer output", "strong shearing loads", "Digital Elmendorf Tear", "Automatic compensation", "perfect reproducibility", "tearing strength tester", "experimental conditions", "complex flexible packaging", "ballistic tearing strength", "Elmendorf Tearing Strength", "falling pendulum instrument", "Elmendorf Tear Tester Digital" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/5993da1c043a740428e47e13.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5993da1c043a740428e47e13.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-08-16T05:37:32.916Z", "updatedon": "2021-04-22T06:57:30.251Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//digital-elmendorf-tear-tester/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "", "tags": [ "Digital Elmendorf Tear Tester Manufacturer", "Digital Elmendorf Tear Tester Supplier", "Digital Elmendorf Tear Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "65af9b1917b8e319740ecb4e", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "HFT/Horizontal Flammability Tester", "description": "Application:\nHorizontal Flammability Tester, to determine the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use. Horizontal flammability tester is safe and easy to operate, Comprises draft free stainless steel cabinet with observation window, sample holder and door mounted burner.\n\nSpecifications:\n\tFire nozzle diameter\t: 9.5mm\n\tFire height\t: 38mm+/-2\n\tSample clamp\t: 360x100mm / Interior Dimension: 330x50mm\n\tThe sample below\t: 25mm Pitch between metal wire is 25mm\n\tMarked line\t: Starting point 38mm/End point 292mm from Igniting point\n\tDistance from Nozzle to Sample: 19mm\n\nStandards:\n•\tIS 15061 Part A,\n•\tISO 3795,\n•\tFMVSS 302,\n•\tDIN 75200, SAE J369,\n•\tASTM D5132,\n•\tJIS D1201,\n•\tBSAU 1690,\n•\tGB 8410,\n•\tPSA-Renault standard D45 1333\n\nPower\t:\t220 /110 V\t50/60 Hz\t2 A\nWeight\t:\t35 Kg\nDimensions:\t460x200x400 mm(LxWxH)\n", "price": 678028.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "SAE", "DIN", "ISO", "BSAU", "LxWxH", "110 V", "9.5mm", "FMVSS", "Power", "50/60 Hz", "A Weight", "JIS D120", "textiles", "Distance", "Comprises", "End point", "ASTM D5132", "metal wire", "automotive", "25mm Pitch", "Marked line", "Fire height", "Sample clamp", "interior use", "sample holder", "Specifications", "460x200x400 mm", "19mm Standards", "Igniting point", "burn resistance", "35 Kg Dimensions", "Interior Dimension", "observation window", "door mounted burner", "PSA-Renault standard", "Fire nozzle diameter", "comparative burn rates", "free stainless steel cabinet", "HFT/Horizontal Flammability Tester Application" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 115, "imageuri": "https://productimages.withfloats.com/actual/65af9b1a6d36668659b98e77.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65af9b1a6d36668659b98e77.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-01-23T10:55:21.768Z", "updatedon": "2024-01-23T10:55:21.768Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//hft-horizontal-flammability-tester/115", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple", "category": "BurnTester", "tags": [ "HFT", "FT" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "659552f74c1d0610285da302", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Automatic Digital Pull Off Adhesion Tester", "description": "Application\nOur APT/ Automatic Digital Pull Off Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n Dolly Size ： 20mm（Standard）；10mm、14mm、50mm（Optional）\n\tResolution ： 0.01MPa（1psi）\n\tAccuracy ： ±1% Full scale \n\tMax. Pull-off Pressure : \no\tΦ10mm dolly →0~80 MPa；(Optional) \no\tΦ14mm dolly→0~40 MPa；(Optional)\no\tΦ20mm dolly→0~20 MPa；(Standard)\no\tΦ50mm dolly→0.2~3.2 MPa；(Optional)\nAccessories:\n• 20mm Aluminum test dollies (20 pcs)\n• Cutting toll for 20mm dollies, \n• 3M Adhesive and glue gun \n• Micro-USB cable\n• Carrying case\n\nPower: Built-in rechargeable lithium battery with standard charging adapter.\nWeight: 4-5 Kg\t \nDimensions: 360 x 75 x 115 mm(LxWxH)\n\nDifferent Types of Pull off Adhesion Test Method for testing\n\nTesting coating adhesion is crucial to ensure the durability and performance of coatings on various surfaces. Several national and international organizations have established test methods to assess coating adhesion. Here are some widely recognized standards:\n\nInternational Test Standards:\nASTM (American Society for Testing and Materials):\n\nASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test:\nThis method evaluates the adhesion of a coating by applying and removing pressure-sensitive tape on the coated surface.\n\nASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers:\nIt measures the tensile adhesion strength of a coating by applying a force perpendicular to the surface.\n\nASTM D7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Tester. \nTo assess the bond strength between a coating and a concrete substrate. The test involves applying a tensile force to a coating using a portable pull-off adhesion tester until the coating detaches from the concrete surface. The force required for detachment is then measured and used to determine the adhesion strength of the coating.\n\nISO (International Organization for Standardization):\n\nISO 4624 Paints and Varnishes – Pull-Off Test for Adhesion\nThis standard provides a method for assessing the adhesion strength of a coating on a substrate. The pull-off test involves applying a tensile force to a coating perpendicular to the substrate using a specific adhesion tester until the coating is detached.\n\nISO 2409 - Paints and Varnishes - Cross-Cut Test:\nThis standard provides a method for assessing the resistance of paint coatings to separation from substrates using a cross-cut pattern.\n\nISO 16276-1 - Corrosion Protection of Steel Structures by Protective Paint Systems - Assessment of, and Specifications for, the Adhesion of Coatings:\nIt specifies a method for assessing the adhesion of coatings to metallic substrates.\n\nSSPC (The Society for Protective Coatings):\n\nSSPC-PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements:\n\nWhile not exclusively for adhesion, it involves checking the adhesion of a coating by making a series of cuts through the coating to the substrate.\n\nBSI (British Standards Institution):\n\nBS EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nThis standard specifies a method for assessing the pull-off strength of a coating using a portable adhesion tester.\n\nJIS (Japanese Industrial Standards):\n\nJIS K 5600-5-6 - Testing Methods for Paints - Part 5: Mechanical Properties of Film - Section 6: Adhesion Test - Cross-Cut Test:\nIt is similar to ISO 2409 and involves making cuts in the coating to assess adhesion.\n\nDIN (Deutsches Institut für Normung - German Institute for Standardization):\n\nDIN EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nSimilar to the ISO standard, this DIN standard specifies a method for assessing pull-off strength.\n\nWhen performing coating adhesion tests, it is essential to follow the specific procedures outlined in these standards to ensure accurate and reproducible results. Additionally, standards may be updated, so it's advisable to check for the latest revisions and editions of the standards relevant to your specific needs.", "price": 392680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "75", "pcs", "0.0", "50mm", "toll", "films", "types", "Φ20mm", "LxWxH", "Weight", "20 MPa", "40 MPa", "115 mm", "system", "80 MPa", "mortars", "3.2 MPa", "Accuracy", "glue gun", "plasters", "substrate", "adhesives", "laminates", "Resolution", "Dolly Size", "Full scale", "Accessories", "Φ10mm dolly", "3M Adhesive", "digital LCD", "20mm dollies", "test diameter", "weakest plane", "concrete coats", "Specifications", "Micro-USB cable", "breaking points", "other materials", "unique instrument", "pull-off strength", "fractured surfaces", "hydraulic pressure", "Carrying case Power", "bond strength testing", "4-5 Kg Dimensions", "Max. Pull-off Pressure", "metals plastic coatings", "adhesive, coating layers", "standard charging adapter", "20mm Aluminum test dollies", "Adhesion Tester Application", "rechargeable lithium battery", "greatest tensile pull-off force", "portable, hand-operated instrument", "APT/ Automatic Digital Pull Off Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 110, "imageuri": "https://productimages.withfloats.com/actual/65a90b77dc543eef6733ec40.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65a90b77dc543eef6733ec40.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-01-03T12:28:39.224Z", "updatedon": "2024-02-21T04:04:04.504Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//automatic-digital-pull-off-adhesion-tester/110", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Tiles Tester", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "61979913e979920001bb7b01", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Digital Pull Off adhesion Tester", "description": "Digital Pull Off Adhesion Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n\tDolly Size\t： 20mm（Standard）；10mm、14mm、50mm（Optional）\n\tResolution\t： 0.01MPa（1psi）\n\tAccuracy\t： ±1% Full scale\n\tMax. Pull-off Pressure : \no\tΦ10mm dolly →0-80 MPa；(Optional)\no\tΦ14mm dolly→0-40 MPa；(Optional)\no\tΦ20mm dolly→0-20 MPa；(Standard)\no\tΦ50mm dolly→0-3.5 MPa；(Optional)\nPower\t: Built-in rechargeable lithium battery with standard charging adapter.\nWeight\t: 3 Kg\t \nDimensions\t: 360 x 75 x 115 mm(LxWxH)\n\nDifferent Types of Pull off Adhesion Test Method for testing\n\nTesting coating adhesion is crucial to ensure the durability and performance of coatings on various surfaces. Several national and international organizations have established test methods to assess coating adhesion. Here are some widely recognized standards:\n\nInternational Test Standards:\nASTM (American Society for Testing and Materials):\n\nASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test:\nThis method evaluates the adhesion of a coating by applying and removing pressure-sensitive tape on the coated surface.\n\nASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers:\nIt measures the tensile adhesion strength of a coating by applying a force perpendicular to the surface.\n\nASTM D7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Tester. \nTo assess the bond strength between a coating and a concrete substrate. The test involves applying a tensile force to a coating using a portable pull-off adhesion tester until the coating detaches from the concrete surface. The force required for detachment is then measured and used to determine the adhesion strength of the coating.\n\nISO (International Organization for Standardization):\n\nISO 4624 Paints and Varnishes – Pull-Off Test for Adhesion\nThis standard provides a method for assessing the adhesion strength of a coating on a substrate. The pull-off test involves applying a tensile force to a coating perpendicular to the substrate using a specific adhesion tester until the coating is detached.\n\nISO 2409 - Paints and Varnishes - Cross-Cut Test:\nThis standard provides a method for assessing the resistance of paint coatings to separation from substrates using a cross-cut pattern.\n\nISO 16276-1 - Corrosion Protection of Steel Structures by Protective Paint Systems - Assessment of, and Specifications for, the Adhesion of Coatings:\nIt specifies a method for assessing the adhesion of coatings to metallic substrates.\n\nSSPC (The Society for Protective Coatings):\n\nSSPC-PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements:\n\nWhile not exclusively for adhesion, it involves checking the adhesion of a coating by making a series of cuts through the coating to the substrate.\n\nBSI (British Standards Institution):\n\nBS EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nThis standard specifies a method for assessing the pull-off strength of a coating using a portable adhesion tester.\n\nJIS (Japanese Industrial Standards):\n\nJIS K 5600-5-6 - Testing Methods for Paints - Part 5: Mechanical Properties of Film - Section 6: Adhesion Test - Cross-Cut Test:\nIt is similar to ISO 2409 and involves making cuts in the coating to assess adhesion.\n\nDIN (Deutsches Institut für Normung - German Institute for Standardization):\n\nDIN EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nSimilar to the ISO standard, this DIN standard specifies a method for assessing pull-off strength.\n\nWhen performing coating adhesion tests, it is essential to follow the specific procedures outlined in these standards to ensure accurate and reproducible results. Additionally, standards may be updated, so it's advisable to check for the latest revisions and editions of the standards relevant to your specific needs.\n", "price": 162680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "75", "Max", "50mm", "Power", "Φ20mm", "films", "types", "LxWxH", "115 mm", "Weight", "system", "80 MPa", "3.5 MPa", "mortars", "plasters", "Accuracy", "substrate", "specified", "adhesives", "laminates", "Resolution", "Dolly Size", "digital LCD", "Φ10mm dolly", "Digital Pull", "test diameter", "weakest plane", "±1% Full scale", "Specifications", "concrete coats", "breaking points", "adhesion Tester", "other materials", "Pull-off Pressure", "unique instrument", "pull-off strength", "hydraulic pressure", "fractured surfaces", "bond strength testing", "3 Kg\t \nDimensions", "metals plastic coatings", "adhesive, coating layers", "standard charging adapter", "rechargeable lithium battery", "greatest tensile pull-off force", "portable, hand-operated instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 103, "imageuri": "https://productimages.withfloats.com/actual/61979915e1109e000198422d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/61979915e1109e000198422d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-11-19T12:31:15.401Z", "updatedon": "2024-02-21T04:04:27.644Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//digital-pull-off-adhesion-tester/103", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Digital Pull Off Adhesion Tester", "tags": [ "Adhesive Tester,", "Digital Pull-Off Adhesion Tester,", "Elcometer 506 Pull-Off Adhesion Tester,", "Adhesion Instrument,", "Adhesive Tester - Best Manufacturer in India,", "pull-off adhesion tester price,", "pull-off adhesion tester price in india,", "elcometer 506 pull-off adhesion tester price,", "", "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "5bc6c3dd08ddfa0001b2f753", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Elmendorf tear tester", "description": "elmendorf tear tester\n\nTo determine the ballistic tearing strength of textiles, plastics, paper or board by falling-pendulum instrument. Automatic specimen clamping and notching is added advantage while testing & even repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid any slipping phenomena. Further, Automatic compensation for friction and levelling errors, so no friction, alignment and maintenance problems.\n\nIt enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminium foil, non-woven fabrics, complex flexible packaging etc. It conforms to the all known test Standards i.e. as per ASTM D1424/5734, ISO 1974/9290, BS ISO 13937, BS 3424/4253/4468, DIN 53862/53128, NEXT 17, M&S P29, INDA IST 100.1, AFNOR G 07-149 & more more…\n\nOwing to perfection and quality oriented approach, we have carved niche in the industry by offering an enormous grade assortment of Textile Testing Machine. This machine is available in varied specifications to fulfil the wide demands of the textile industry. The offered machine is availed in varied sizes and other related specifications, to meet needs of our esteemed clients. Clients can avail the Textile Testing Machine from us at market leading rates.\n\nWe are leading manufacturer & Supplier of Elmendorf tear tester in India. \n\n| latest elmendorf tear tester | elmendorf tear tester in Vadodara |elmendorf tear tester in Gujarat | best elmendorf tear tester | best supplier for elmendorf tear tester | manufacturer elmendorf tear tester | supplier for elmendorf tear tester| best selling elmendorf tear tester in India | \n\nView more at: http://www.appleelectroniks.com/computerized-elmendorf-tear-tester-3767343.html or send us your inquiry at our email appleasia99@gmail.com\n\nElmendorf tear tester Manufacturer \nElmendorf tear tester Supplier \nElmendorf tear tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 85, "imageuri": "https://productimages.withfloats.com/actual/5bc6c5454c9cf000012c2f87.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5bc6c5454c9cf000012c2f87.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-10-17T05:08:45.244Z", "updatedon": "2021-04-22T05:55:51.916Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//elmendorf-tear-tester/85", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "elmendorf tear tester", "tags": [ "elmendorf tear tester", "elmendorf tear tester price", "elmendorf tear tester manual", "elmendorf tear tester procedure", "elmendorf tear tester manufacturers", "elmendorf tear tester calculation", "elmendorf tear tester calibration", "elmendorf tear test formula", "how to use elmendorf tear tester", "calibration of elmendorf tear tester", "how to calibrate elmendorf tear tester", "elmendorf tear test results", "elmendorf tear test units", "elmendorf tear test procedure", "Elmendorf tear tester Manufacturer", "Elmendorf tear tester Supplier", "Elmendorf tear tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5bc1f022b942740001fe28d6", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "push pull tester", "description": "Application\nOur Automatic push pull or Automatic Force Tester is unique instrument for tension/compression testing with good stability, wide application and convenient usage with function of step less speed adjusting, uniform motion, converting mode between manual and automatic operation. It is used for various applications such as Peeling & breaking strength, compression and tensile testing of Crimped wires, Lugs, Metal wires, Fabric, Yarn, Strips, as well as Scientific Research Institute & many more.\n\nFeatures:\n\tSimple operation, able to be used with various kinds of fixtures.\n\tStep less speed regulation, gear drive \n\tCompact design & structure with stable drive \n\nSpecifications:\n\tCapacity\t\t: 50N (5Kg)/ 500N (50Kg)\n\tAccuracy\t\t: 0.01N / 0.1N\n\tUnits\t\t\t: N, Kgf, Lbf\n\tTraveling Length\t: 400mm/ 700mm\n\tSpeed Selector\t: 25 to 300 mm/min\n\tData Output \t\t: RS232 communications\n\nPower/Air\t: 220 /110 V 50/60 Hz \nWeight\t: 45 Kg\tDimensions\t: 300 x 400 x 980 mm(L x W x H)\n\npush pull tester Manufacturer \npush pull tester Supplier \npush pull tester Exporter\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 83, "imageuri": "https://productimages.withfloats.com/actual/5bc1f02205011e0001cbdce6.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5bc1f02205011e0001cbdce6.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-10-13T13:16:18.302Z", "updatedon": "2021-04-22T09:37:56.971Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//push-pull-tester/83", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "push pull tester india", "tags": [ "push pull tester india", "push pull load tester", "push pull door tester", "digital push pull tester", "push and pull tester", "the push pull test", "push pull tester", "push pull test safety barrier", "spring push pull force tester", "push pull force tester", "push pull tester Manufacturer", "push pull tester Supplier", "push pull tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b38c4dd80b30515ff730f", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Computerized Elmendorf Tear Tester", "description": "Computerized Elmendorf Tear Tester - Elmendorf Tear Tester - Elmendorf Tearing Strength Tester - Elmendorf - Tearing strength Tester\n\nBacked by a team of professionals, we are engaged in offering wide range of Computerized Elmendorf Tear Tester which is used to determine the ballistic tearing strength of textiles, plastics, paper or board and also known as computer controlled falling-pendulum instrument.\n\nApplication:\n\nIt enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics) or liable to be damaged by sharp or heavy objects (e.g. paper bags). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminum foil, non-woven fabrics, complex flexible packaging etc. But does not apply to sparse fabric or stretch materials which tearing direction might be shift in test.\nCompressed air of 0.4~ 0.7Mpa is required. \n\nProcedure:\n\nThe test is carried out on a specimen composed of one or more sheets of standard Dimensions 100 x 63 mm, a crack in length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn after initiating the tear. The energy of a pendulum of suitable Weight is used to completely tear the specimen. The difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is a measure of the energy absorbed in tearing the sample. This angular movement is measured with a digital encoder and is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in the apparatus\n\nFeatures: \n\nWorks in accordance with all known test Standards\nThe model is the only one that covers the most completed test range from 0 to 12800cN\nRS-232 data output, equipped with Lenovo computer and Tearing Test software, and Panasonic printer\nMachine can be controlled by the large graphic touch panel without computer and software\nAutomatic specimen clamping and notching\nRepeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping phenomena, thus ensuring perfect reproducibility of the experimental conditions\nAutomatic compensation for friction and levelling errors, no slave pointer, therefore no friction, alignment and maintenance problems\n\nSpecification:\n\nCapacity: 0-12800 grams (0 ~ 128N)\nPendulum Range(cN): 0~ 1600, 0 ~ 3200, 0 ~ 6400, 0 ~ 12800\nAccuracy: 0.2% of pendulum range\nUnit: GF, MN, CN, CP, LB\n\nIncluded Accessories:\n\nProfessional Elmendorf Tearing Test software\nComplete with work pendulums and calibration Weights: 1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb), 12800cN/g(28.0lb)\n2 pcs of Cutting blades\n1 pcs of Specimen cutting template\nPower/Compressed Air 220 V / 110V 50 / 60 Hz 0.5-0.7 Mpa\nWeight 75 Kg\nDimensions 560 x 420 x 530 mm (L x W x H)\n\nComputerized Elmendorf Tear Tester Manufacturer \nComputerized Elmendorf Tear Tester Supplier \nComputerized Elmendorf Tear Tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "cn", "mm", "pcs", "air", "energy", "friction", "paper bags", "test range", "wide range", "e g fabrics", "single sheet", "aluminum foil", "plastic films", "slave pointer", "Test software", "work pendulums", "pendulum range", "test Standards", "digital encoder", "suitable Weight", "levelling errors", "angular movement", "non woven fabrics", "Panasonic printer", "stretch materials", "RS 232 data output", "pneumatic specimen", "Automatic specimen", "dynamic resistance", "mean tearing force", "calibration Weights", "rapid determination", "standard Dimensions", "large graphic touch", "maintenance problems", "strong shearing loads", "Automatic compensation", "Elmendorf Tearing Test", "experimental conditions", "perfect reproducibility", "tearing strength tester", "complex flexible packaging", "ballistic tearing strength", "Elmendorf Tearing Strength", "falling pendulum instrument", "Computerized Elmendorf Tear", "Elmendorf Tear Tester Computerized" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 30, "imageuri": "https://productimages.withfloats.com/actual/5993d9c972d9ce0a90ca8c06.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5993d9c972d9ce0a90ca8c06.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-08-16T05:36:08.385Z", "updatedon": "2021-04-22T07:17:06.272Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//computerized-elmendorf-tear-tester/30", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "", "tags": [ "Computerized Elmendorf Tear Tester Manufacturer", "Computerized Elmendorf Tear Tester Supplier", "Computerized Elmendorf Tear Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6705231425175ea16a2f049c", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Digital Pull Off Adhesion Tester", "description": "Our DPT/S Digital Pull Off Adhesion Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials.\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\nStandards : EN ISO 13433\n\nPower\t: Built-in rechargeable lithium battery with standard charging adapter\nWeight\t: 7.5 Kg.\nDimensions\t: 441 x 149 x130 mm(LxWxH)\n", "price": 140500.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "7.5 Kg", "EN ISO", "digital LCD", "weakest plane", "test diameter", "concrete coats", "Adhesion Tester", "breaking points", "other materials", "unique instrument", "pull-off strength", "hydraulic pressure", "fractured surfaces", "DPT/S Digital Pull", "bond strength testing", "metals plastic coatings", "adhesive, coating layers", "rechargeable lithium battery", "greatest tensile pull-off force", "standard charging adapter Weight", "portable, hand-operated instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 136, "imageuri": "https://productimages.withfloats.com/actual/67052316c3533fe8fd31f8c1.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/67052316c3533fe8fd31f8c1.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-08T12:18:28.463Z", "updatedon": "2024-10-08T12:18:28.463Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET//-digital-pull-off-adhesion-tester/136", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "DPT/S", "tags": [ "DPT/S Digital Pull Off Adhesion Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }