Home> Products> other packaging materials

{ "products": [ { "_id": "65eec74c48656d173c851f52", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Oxygen Transmission Rate Tester", "description": "Application\nOxygen Transmission Rate Test System is designed and manufactured based on the Coulometric oxygen sensor which provide high-sensitivity measurements of oxygen & it fully conforms to ASTM D3985. This instrument can be used to measure the oxygen transmission rate of barrier materials with high and medium barrier properties with high accuracy and high efficiency. Design of integrated test block consisting of three permeation cells. Equipped with a high precision sensor and professional computer- controlled system, the instrument can regulate and control the temperature, humidity and flow rate precisely, guaranteeing high sensitivity and excellent repeatability of test results. The device is applicable to the determination of oxygen permeability of plastic films, sheeting, paper, and other packaging materials used in food, pharmaceutical, medical apparatus, consumer products, photovoltaic and electronic industries, etc. Optional accessories extend the capability to testing complete packages and systems such as bottles, pouches, cartons, blister packs, tubes and more.\nThe pre-conditioned specimen is mounted between the upper and lower chambers at ambient atmospheric pressure. The upper chamber contains oxygen or air and the lower chamber is slowly purged by a stream of nitrogen. Due to the concentration difference between the two chambers, oxygen molecules permeate through the specimen into the nitrogen side and are taken to the sensor where proportional electrical signals are generated. The oxygen transmission rate is then obtained by analyzing the signals and\ncalculating the volume of oxygen measured by the sensor. For whole package samples,high purity nitrogen flows inside the package, and oxygen or air flows outside.\n\nStandards\n\tASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2, JIS K7126-B\nFeatures:\n•\tEquipped with baseline correction function, measure system error and ensure test accuracy.\n•\tIt has standard film calibration function and sensor external calibration function.\n•\tReal-time monitor test status, save the test status in the whole process, to realize the reproducibility of all test data curves, and to facilitate the subsequent evaluation of the test process.\n•\tThe test curves of each cavity can be displayed individually or in groups for comparison ; the test curves have the capabilities of full-screen display, partial observation, and variable ratio display.\n•\tWith power failure data storage function, data sampling rate is adjustable, has automatic repeat test function.\n•\tOpen database system for easy data analysis.\n•\tTrace oxygen sensor, can measure oxygen content down to ppb level; Pa level micro current measurement, higher measurement accuracy.\n•\tHigh-precision mass flowmeter, precise flow control.\n•\tProfessional piping system to ensure the cleanliness of the carrier gas.\n•\tThe patented pipeline flushing technology speeds up the test speed and makes the test more efficient.\n•\tThe installation technology of anti-side leakage sealing of the sample enhances the sealing of the sample.\n•\tThe test humidity can be precisely controlled, and the humidity control accuracy is not affected by changes in the laboratory environment.\n•\tThe overall temperature control technology controls the temperature of the test chamber and pipeline as a whole, with high temperature control accuracy.\n•\tAutomatic test: set the test parameters, the test will be carried out automatically after the start, automatically judge the end of the test and save the test results.\n•\tHost software encryption database system, data can be exported, storage, query, printing, and other functions. Through the analysis of historical data, it is easy to get the historical dynamics of the product.\n•\tHigh-efficiency test, low nitrogen consumption, and can be verified by national first-class standard test material.\n•\tExtensible container testing.\n•\tThe system has self-inspection ability to avoid continuing testing under fault conditions. Gas flow monitoring, automatic alarm when there is less gas or no gas.\n\nTechnical Specifications:\n•\tTest Range Film\t: 0.01～6500(cm3/㎡.24h)\n•\tResolution\t: 0.001 (cm3/㎡.24h)\n•\tStandard Test Area\t: 50 c㎡\n•\tSpecimen Thickness\t: 1 micron to 3000 micron\n•\tTest Chamber\t: 3 Test Chambers Temperature Control Range\t: 15℃to 55℃ Temperature Control Accuracy : ±0.1℃\n•\tTest Humidity RH\t: 0%, 35% to 90%±1%, 100% (Optional)\n•\tCarrier Gas\t: 99.999% High-purity Nitrogen (Customer’s scope)\n•\tFlow of Carrier Gas\t: 0-100 mL/min (Customized)\n•\tCarrier Gas Pressure\t: ≥0.2MPa\n•\tPort Size\t: 1/8 inch metal tubing\n•\tRemark\t: Gas source (nitrogen, oxygen) is provided by user\n•\tPC Software \t: Smart PC Software is supplied with Machine.\nPower : 220VAC, 50Hz, 25W\nWeight: 60Kg\nDimensions\t750x415x450mm (L x W x H)\n\n\n", "price": 3292680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "±", "15", "100", "end", "MPa", "ISO", "air", "50Hz", "user", "start", "query", "paper", "tubes", "scope", "50 c㎡", "volume", "device", "Design", "cavity", "stream", "Remark", "220VAC", "groups", "Machine", "systems", "bottles", "pouches", "changes", "cartons", "1 micron", "less gas", "Customer", "sheeting", "printing", "Standards", "Port Size", "ppb level", "flow rate", "25W Weight", "ASTM F1927", "ASTM F1307", "ASTM F2622", "capability", "Gas source", "Resolution", "test speed", "instrument", "ASTM D3985", "3000 micron", "test curves", "cleanliness", "photovoltaic", "two chambers", "test chamber", "capabilities", "test results", "test process", "system error", "test accuracy", "high accuracy", "plastic films", "blister packs", "determination", "nitrogen side", "upper chamber", "lower chambers", "oxygen content", "pharmaceutical", "Automatic test", "reproducibility", "60Kg Dimensions", "package samples", "Test Range Film", "other functions", "high efficiency", "test parameters", "automatic alarm", "historical data", "test data curves", "high sensitivity", "fault conditions", "oxygen molecules", "Test Humidity RH", "complete packages", "consumer products", "medical apparatus", "Smart PC Software", "barrier materials", "Standard Test Area", "easy data analysis", "continuing testing", "Specimen Thickness", "data sampling rate", "full-screen display", "Gas flow monitoring", "historical dynamics", "oxygen permeability", "partial observation", "Optional accessories", "JIS K7126-B Features", "conditioned specimen", "precise flow control", "High-efficiency test", "Carrier Gas Pressure", "Open database system", "high purity nitrogen", "subsequent evaluation", "high precision sensor", "integrated test block", "1/8 inch metal tubing", "electronic industries", "laboratory environment", "three permeation cells", "variable ratio display", "self-inspection ability", "installation technology", "excellent repeatability", "concentration difference", "low nitrogen consumption", "Technical Specifications", "anti-side leakage sealing", "medium barrier properties", "humidity control accuracy", "other packaging materials", "Coulometric oxygen sensor", "Temperature Control Range", "Professional piping system", "higher measurement accuracy", "ambient atmospheric pressure", "Extensible container testing", "pipeline flushing technology", "baseline correction function", "99.999% High-purity Nitrogen", "high-sensitivity measurements", "Real-time monitor test status", "High-precision mass flowmeter", "automatic repeat test function", "proportional electrical signals", "55℃ Temperature Control Accuracy", "high temperature control accuracy", "standard film calibration function", "Pa level micro current measurement", "power failure data storage function", "Oxygen Transmission Rate Test System", "sensor external calibration function", "overall temperature control technology", "Host software encryption database system", "professional computer- controlled system", "Oxygen Transmission Rate Tester Application", "national first-class standard test material" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 123, "imageuri": "https://productimages.withfloats.com/actual/65eec74fdf72d2574cec7a7b.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/65eec74fdf72d2574cec7a7b.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-03-11T08:56:44.763Z", "updatedon": "2024-03-11T08:58:23.128Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/oxygen-transmission-rate-tester/123", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Textiles Testing machine", "tags": [ "otr", "OTR", "Transmission Tester", "Oxygen" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "5bc6c3dd08ddfa0001b2f753", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Elmendorf tear tester", "description": "elmendorf tear tester\n\nTo determine the ballistic tearing strength of textiles, plastics, paper or board by falling-pendulum instrument. Automatic specimen clamping and notching is added advantage while testing & even repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid any slipping phenomena. Further, Automatic compensation for friction and levelling errors, so no friction, alignment and maintenance problems.\n\nIt enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminium foil, non-woven fabrics, complex flexible packaging etc. It conforms to the all known test Standards i.e. as per ASTM D1424/5734, ISO 1974/9290, BS ISO 13937, BS 3424/4253/4468, DIN 53862/53128, NEXT 17, M&S P29, INDA IST 100.1, AFNOR G 07-149 & more more…\n\nOwing to perfection and quality oriented approach, we have carved niche in the industry by offering an enormous grade assortment of Textile Testing Machine. This machine is available in varied specifications to fulfil the wide demands of the textile industry. The offered machine is availed in varied sizes and other related specifications, to meet needs of our esteemed clients. Clients can avail the Textile Testing Machine from us at market leading rates.\n\nWe are leading manufacturer & Supplier of Elmendorf tear tester in India. \n\n| latest elmendorf tear tester | elmendorf tear tester in Vadodara |elmendorf tear tester in Gujarat | best elmendorf tear tester | best supplier for elmendorf tear tester | manufacturer elmendorf tear tester | supplier for elmendorf tear tester| best selling elmendorf tear tester in India | \n\nView more at: http://www.appleelectroniks.com/computerized-elmendorf-tear-tester-3767343.html or send us your inquiry at our email appleasia99@gmail.com\n\nElmendorf tear tester Manufacturer \nElmendorf tear tester Supplier \nElmendorf tear tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 85, "imageuri": "https://productimages.withfloats.com/actual/5bc6c5454c9cf000012c2f87.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5bc6c5454c9cf000012c2f87.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-10-17T05:08:45.244Z", "updatedon": "2021-04-22T05:55:51.916Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/elmendorf-tear-tester/85", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "elmendorf tear tester", "tags": [ "elmendorf tear tester", "elmendorf tear tester price", "elmendorf tear tester manual", "elmendorf tear tester procedure", "elmendorf tear tester manufacturers", "elmendorf tear tester calculation", "elmendorf tear tester calibration", "elmendorf tear test formula", "how to use elmendorf tear tester", "calibration of elmendorf tear tester", "how to calibrate elmendorf tear tester", "elmendorf tear test results", "elmendorf tear test units", "elmendorf tear test procedure", "Elmendorf tear tester Manufacturer", "Elmendorf tear tester Supplier", "Elmendorf tear tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6705231425175ea16a2f049c", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Digital Pull Off Adhesion Tester", "description": "Our DPT/S Digital Pull Off Adhesion Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials.\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\nStandards : EN ISO 13433\n\nPower\t: Built-in rechargeable lithium battery with standard charging adapter\nWeight\t: 7.5 Kg.\nDimensions\t: 441 x 149 x130 mm(LxWxH)\n", "price": 140500.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "7.5 Kg", "EN ISO", "digital LCD", "weakest plane", "test diameter", "concrete coats", "Adhesion Tester", "breaking points", "other materials", "unique instrument", "pull-off strength", "hydraulic pressure", "fractured surfaces", "DPT/S Digital Pull", "bond strength testing", "metals plastic coatings", "adhesive, coating layers", "rechargeable lithium battery", "greatest tensile pull-off force", "standard charging adapter Weight", "portable, hand-operated instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 136, "imageuri": "https://productimages.withfloats.com/actual/67052316c3533fe8fd31f8c1.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/67052316c3533fe8fd31f8c1.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-08T12:18:28.463Z", "updatedon": "2024-10-08T12:18:28.463Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/-digital-pull-off-adhesion-tester/136", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "DPT/S", "tags": [ "DPT/S Digital Pull Off Adhesion Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "6703d52dd206a92ca57461c9", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Oxygen Index Tester ", "description": "\nMainly used to assess the combustion performance of non-metallic materials under the specified test conditions, that is, determine the volume fraction of non-metallic materials just to maintain the minimum oxygen concentration of combustion. Suitable for testing the oxygen index of textiles, plastics, rubber, fiber, wood, insulation materials and their products.\n\nFeatures:\n\n1.The main chassis with PC / ABS synthetic flame retardant materials as a whole abrasive molding. The overall performance is better than pure PC, ABS and metal box. Streamlined design, elegant appearance, free from electromagnetic interference, test more accurate.\n \n2.The first about the push and pull combustion stage and glass tube, can choose to switch the use of the left or right. Not only to meet the different test personnel to use, and rapid response to the standard requirements of the \"multiple tests, should be used two combustion tube, such a cooling, two outside a test\" Otherwise, the combustion tube cooled to 23⁰C ± 2⁰C, waste test Time, low test efficiency.\n\n3. To improve the old equipment, glass bead diffusion filling method, using a new gas diffusion system, easy installation, while ensuring a more uniform diffusion of gas mixture. 4, the sensor uses the world's leading British CITY imported special sensors to ensure the accuracy of the test.\n\n4. Using PLC & 7-inch high-definition LCD touch screen, related operations completed by the touch screen, real-time display of experimental data.\n\n5. Built-in microcomputer and control program, real-time acquisition, linear analysis of experimental data, and automatic data storage.\n\n6. Built-in time control module, automatic timing of combustion time, overcoming the drawbacks of using separate stopwatch timing and cumbersome.\n\n7. Built-in gas temperature sensor, real-time monitoring and display of gas temperature.\n\n8. Built-in count module, automatically record the number of tests.\n\n9. Configure the mini thermal printer, you can print the test results and other relevant data.\n\n10. The use of constant oxygen concentration in the air one-touch calibration, convenient and accurate test.\n\n11. Solenoid valve control system, you can switch around the combustion stage, easy to operate.\n\nTechnical Parameter:\n\nCombustion tube and the base\tQuartz glass, diameter 95mm, the total\nheight of 450mm (two sets)\nThe oxygen concentration adjustment range\t0 ~ 100%, Resolution: 0.1%\nResponse time\t<3s\nBurning time\t0-999.9S, accuracy 0.1S\nWorking pressure\t0.1MPa ~ 0.3MPa\nGas\tIndustrial oxygen and nitrogen (customer to arrange locally)\nWorking power:\tAC220V, 50Hz, 50W\n\nStandards\n•\tASTM D 2863, \n•\tISO 4589-2\n\nPower: AC220V, 50Hz, 50W\nDimensions: 830mmX600mmX900mm (W x L x H)\n", "price": 762680.0, "discountamount": 200000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "ASTM D", "pure PC", "two sets", "metal box", "glass tube", "gas mixture", "total height", "main chassis", "test results", "Burning time", "count module", "Working power", "50W Standards", "accurate test", "Response time", "multiple tests", "50W Dimensions", "rapid response", "linear analysis", "special sensors", "volume fraction", "test conditions", "combustion time", "control program", "waste test Time", "Working pressure", "combustion stage", "abrasive molding", "automatic timing", "real-time display", "easy installation", "experimental data", "Industrial oxygen", "uniform diffusion", "base Quartz glass", "related operations", "elegant appearance", "Streamlined design", "Technical Parameter", "overall performance", "two combustion tube", "time control module", "low test efficiency", "other relevant data", "real-time monitoring", "insulation materials", "mini thermal printer", "leading British CITY", "real-time acquisition", "standard requirements", "combustion performance", "non-metallic materials", "gas temperature sensor", "automatic data storage", "different test personnel", "new gas diffusion system", "separate stopwatch timing", "air one-touch calibration", "electromagnetic interference", "minimum oxygen concentration", "constant oxygen concentration", "Solenoid valve control system", "oxygen concentration adjustment", "Oxygen Index Tester Application", "glass bead diffusion filling method", "ABS synthetic flame retardant materials", "7-inch high-definition LCD touch screen" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 135, "imageuri": "https://productimages.withfloats.com/actual/6703d5307a16bf5e87ce3b62.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6703d5307a16bf5e87ce3b62.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-07T12:33:49.625Z", "updatedon": "2024-10-08T11:51:31.733Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/oxygen-index-tester-/135", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "OIT", "tags": [ "Oxygen Index Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "65febaba41b64415bcc59447", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "WTM10K Digital Wire Tension Meter ", "description": "Application\nThe WTM10K Digital Wire Tension Meter is a hand-held device which accurately measures the running as well as static tensions of a wide variety of process materials including Wires, fibers, optical fibers, etc. It employs the \"three-roller principle\" of tension measurement where the outer two reference rollers are fixed to create a known angle of wrap over the middle sensing roller. The middle roller is part of a precision strain gauge sensing system which accurately measures the resulting force on the roller. This value is converted into a highly accurate and repeatable tension value using proprietary computer calibration formulas which correct for different material diameters, gravity and other critical\nParameters.\n\nFeatures:\n\tHigh accuracy and high resolution.\n\tDigital display with no guessing or errors.\n\tWith 4 measurement unit for selection and conversion, N, kg, lb, g.\n\tPower is supplied by 4xAAA alkaline battery.\n\tWith 10 minutes auto power off and manual power off.\n\nModels:\n•\tWTM/200\t(0.1cN to 200cN)\n•\tWTM/500\t(0.1cN to 500cN)\n•\tWTM/1000\t(50.0 cN to 1000cN)\n•\tWTM/2000\t(200.0cN to 2000cN)\n•\tWTM/2500\t(250.0cN to 2500cN)\n•\tWTM/5000\t(500.0cN to 5000cN)\n•\tWTM10K\t(1.0Kg to 10.0Kg)\n\nKey Specifications:\nUnit\tkgf, gf, N, Lbf\nResolution\t0.001kgf, 0.001N, 1gf, 0.001Lbf\nAccuracy \t±1.0% or better\nOverload Capacity \t150% of Full Scale\nMeasuring Principle\tStrain gauge\nSensing Roller\tDeflection of Sensing Roller (max.) 0.2mm\nTemperature Coefficient\tZero: less than +0.3% FS/°C Span: less than +0.01% FS/°C\nDisplay\tBlack/Blue Back light LCD\nOverrange Indicator\tBuzzer Alarm\nPower Off\t10 Minutes Auto Power Off, Manual Power Off\nRoller Material\tStainless Steel (Standard)\nPlastic (Optional)\nMaximum Speed\t2000m/min\nPower Supply\t4x1.5 AAA(UM-4) Battery\nOperation Temperature\t0~40°C\nOperation Humidity\t<80%\nWeight\t400g\nSize\tMain Unit: 160x80x30mm\n\nPower Supply: 4x1.5 AAA(UM-4) Battery\nWeight: 400g\n", "price": 215680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "lb", "part", "3% FS", "500cN", "200cN", "Wires", "angle", "10.0Kg", "1000cN", "0.0 cN", "Models", "errors", "°C Span", " Power", "running", "gravity", "Standard", "accurate", "guessing", "Unit kgf", "Features", "selection", "+0.01% FS", "Main Unit", "conversion", "Full Scale", "manual power", "Power Supply", "wide variety", "High accuracy", "middle roller", "Maximum Speed", "optical fibers", "high resolution", "resulting force", "static tensions", "Digital display", "hand-held device", "Weight 400g Size", "Overload Capacity", "process materials", "4 measurement unit", "Operation Humidity", "Key Specifications", "tension measurement", "10 minutes auto power", "middle sensing roller", "three-roller principle", "4xAAA alkaline battery", "repeatable tension value", "Sensing Roller Deflection", "other critical Parameters", "outer two reference rollers", "Temperature Coefficient Zero", "different material diameters", "4x1.5 AAA(UM-4) Battery Weight", "Roller Material Stainless Steel", "Measuring Principle Strain gauge", "UM-4) Battery Operation Temperature", "C Display Black/Blue Back light LCD", "precision strain gauge sensing system", "The WTM10K Digital Wire Tension Meter", "Overrange Indicator Buzzer Alarm Power", "proprietary computer calibration formulas", "WTM10K Digital Wire Tension Meter Application" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 127, "imageuri": "https://productimages.withfloats.com/actual/65febabc2e2818ab2559dd73.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/65febabc2e2818ab2559dd73.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-03-23T11:19:22.081Z", "updatedon": "2024-03-23T11:19:22.081Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/wtm10k-digital-wire-tension-meter-/127", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Wire Tension Meter", "tags": [ "wtm10k", "WTM", "10KWTM", "DWTM10K" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "65e041b0d6a5260f607bf922", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ET64/Elmendorf Tearing Tester ", "description": "Application:\nElmendorf Tearing Tester is designed for the tearing test of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, Textiles and nonwovens. It is the necessary testing instrument for the packaging, paper Industries, quality inspections and quarantine labs.\n\nFeatures: \n\n•\tThe instrument is controlled by 5 inch color touch screen HMI\n•\tThe instrument is designed by automatic and electronic measurement which improves the testing accuracy\n•\tPneumatic specimen clamping and pneumatic release of pendulum could avoid the system error effectively\n•\tComputer assisted horizontal adjustment system could maintain the instrument optimum status\n•\tElmendorf tearing tester equipped with double system operation, micro-computer or computer software control.\n•\tEquipped with pendulums of multiple capacities.\n•\tStorage and editing of up to 1000 readings\n•\tAutomatic calibration of pendulum\n•\tCalculates force of multiple plies\n•\tHave statistic function: max, min, average\n•\tUnits: Milli Newtons (mN), Grams-force (gf), Pounds-force (lbf).\n•\tSelect related pendulum accordingly.\nSpecifications:\nPendulum Capacity:200g (2000mN), 400g (4000mN) ,800g(8000mN), 1600 g(16000mN), 3200g (32000mN), 6400g（64000mN)\nUnit: Lb, gf, mN\nIndication accuracy: <±1% (in house control it within ±0.5%）\nResolution: 0.01mN\nTearing Length: 43±0.5mm\nSample Clamp: Pneumatic\nRelease: Pneumatic\nClamping Pressure: 0.4-0.8Mpa\n\nStandards: ISO 6383-1, ISO 6383-2, ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414, ASTM D1922, IS 13360\n\nPower supply : AC 220V, 50Hz\nDimensions : 470mm×340mm×530mm\nNet weight : 40kg\n", "price": 1427800.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "mN", "gf", "Lb", "min", "max", "HMI", "ISO", "PVDC", "400g", "40kg", "3200g", "up to", "paper", "force", "house", "Units", "sheets", "double", "1600 g", "editing", "AC 220V", "Storage", "average", "Features", "Textiles", "Standards", "pendulums", "ASTM D689", "TAPPI T41", "packaging", "nonwovens", "cardboard", "polyester", "ASTM D1424", "ASTM D1922", "Resolution", "Industries", "Net weight", "flexible PVC", "Power supply", "Sample Clamp", "system error", "polypropylene", "1000 readings", "Milli Newtons", "multiple plies", "Tearing Length", "Specifications", "optimum status", "micro-computer", "woven materials", "quarantine labs", "50Hz Dimensions", "related pendulum", "system operation", "waterproof films", "testing accuracy", "pneumatic release", "Pendulum Capacity", "Clamping Pressure", "statistic function", "Indication accuracy", "multiple capacities", "quality inspections", "Automatic calibration", "electronic measurement", "computer software control", "5 inch color touch screen", "Pneumatic specimen clamping", "necessary testing instrument", "horizontal adjustment system", "Elmendorf Tearing Tester Application" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 122, "imageuri": "https://productimages.withfloats.com/actual/65e041b21825904bb8c3e5bd.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/65e041b21825904bb8c3e5bd.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-02-29T08:34:56.185Z", "updatedon": "2024-02-29T08:34:56.185Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/et64-elmendorf-tearing-tester-/122", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Paper testing", "tags": [ "ET64", "ETT", "ET" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "65ca0da5b4e77b236cfaa305", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Texture Analyzer", "description": "Our TXA Texture Analyzer Tester is an advanced instrument used to measure the physical properties of food and other materials, such as texture, firmness, and consistency, by applying controlled force and measuring the response. It is widely used in industries such as food production, pharmaceuticals, and materials science to assess attributes like crispness, hardness, chewiness, and more, ensuring product quality and consistency.\n\nFeatures:\n Touch Screen Display  \n PLC & Servo Drive for precise Operation.  \n Simple operation, able to be used with various fixtures.  \n Step less speed regulation, gear drive  \n Compact design & structure with stable drive \n\nSpecifications:\n Capacity : 200N (20.0Kg) with facility to attach multiple Load cells  \nAccuracy : 1.0gms / 0.01N  \nLoad cell accuracy : 0.5% of reading down to 1% of load cell capacity  \nDistance Resolution: 0.01 mm (even 0.1 Micron)  \nForce Resolution : 1.0gm or 0.1N  \nSpeed Range : 0.01 to 50 mm/sec  \nUnits : Gm, N, Kgf, Lbf  \nTraveling Length : > 400mm (Customized)  \nSpeed Selector : 0 to 3000 mm/min  \nData Output : USB/ Ethernet  \n\nModels :\n TXA50/S – 05 kg (0.1gms / 0.01N)\n TXA100/S – 10 Kg (0.1gms / 0.01N)\n TXA200/S – 20 kg (0.1gms / 0.01N)\n TXA500/S – 50 kg (1.0gms / 0.01N)\n\nPower/Air : 220V, 50Hz \nWeight : 45 Kg \nDimensions: 450 x 450 x 1080 mm(LxWxH)", "price": 892680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "1N", "450", "PLC", "Lbf", "Kgf", "gms", "mode", "3000", "Peel", "200N", "10 Kg", "05 kg", "20 kg", "50 kg", "400mm", "TXA50", "LxWxH", "Units", "TXA200", "TXA100", "manual", "1080 mm", "0.01 mm", "Syringe", "facility", "Puncture", "function", "Features", "structure", "Power/Air", "0.1 Micron", "0.01 to 50", "gear drive", "Data Output", "Servo Drive", "Speed Range", "Glass Ampules", "USB/ Ethernet", "Rubber stopper", "Piercing force", "good stability", "Speed Selector", "Compact design", "uniform motion", "Force Resolution", "Traveling Length", "wide application", "various fixtures", "Simple operation", "45 Kg Dimensions", "convenient usage", "Penetration test", "unique instrument", "precise Operation", "hypodermic needle", "Measuring Strength", "Gel/Bloom Strength", "load cell capacity", "Load cell accuracy", "automatic operation", "Distance Resolution", "multiple Load cells", "various applications", "Touch Screen Display", "110 V 50/60 Hz Weight", "Penetrability testing", "Texture Analyzer Tester", "step less speed adjusting", "Step less speed regulation", "stable drive Specifications", "Texture Analyzer Application", "Scientific Research Institute" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 119, "imageuri": "https://productimages.withfloats.com/actual/65ca0da7f71fb2d544cf288e.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65ca0da7f71fb2d544cf288e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-02-12T12:23:01.233Z", "updatedon": "2024-08-20T09:35:46.764Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/texture-analyzer/119", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Food Texture Analyzer", "tags": [ "TXA200/S", "Texture Analyzer Tester", "Apple Food Texture Analyzer Tester", "TXA100/S", "Food Texture Analyzer Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "65afb3197d5b260c20c20ae6", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "MFT/Multi Purpose Flammability Tester", "description": "Application:\nMFT Multi Purpose Flammability Tester, to determine the flammability resistance of textile fabrics and for the flammability test of toys and toy materials. Its vertical test frame with changeable specimen holders and burner covers offers a wide range of vertical oriented textile fabrics. This machine meet almost all the BS, EN, ISO and other similar standards which defined a test method that a vertical oriented fabric subject to a small flame.\n\nThe gas is controlled by a solenoid valve, ignition time is digitally set and automatically applied to specimen mounted, test result is displayed on large screen. The improved marker threads mounting are easy and fast, infrared detectors are used as micro-switch offers accurate and reliable timing.\t\n\nSpecifications:\n\tMeets most vertical oriented tests\n\tProgrammable PLC system, Large graphic touch panel, optical scanning devices for threads breaking detection, timing range 0-999.9s and accuracy 0.1s\n\tAutomatic flame ignition and flame application, automatic gas open / off.\n\tAutomatic change for butane gas and propane gas.\n\tOptional test frame and holder for toys flammability test (EN 71-2)\n\tEasy-set device for burner position (surface & edge ignition, toys test)\n\tDetachable controller ensures safety of operator\n\tInterchangeable Burners (BS 5438 & BS 6941 & EN 71-2)\n\tinterchangeable, precision Test Frames for different standards \n\tVertical and horizontal marker threads\n\tTray for filter paper and test debris \t\n\nStandards :\nIS 15061 Part B & C, BS EN ISO 6940 (1995&2004) / 6941 (1995&2003) / BS EN ISO 15025, EN71-2, BS EN 1101 / 1102 / 1103, BS EN 13772 , BS EN 14878, DIN 66080, BS 5438 (1976 & 1989), BS EN71-2: 2006.\n\nPower : 220 /110 V 50/60 Hz 3 A\t\nWeight : 70 Kg\nDimensions: 700 x 600 x 1030 mm (LxWxH)\n\n\n\n\n", "price": 862679.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "700", "DIN", "Tray", "paper", "LxWxH", "600 x", "Power", "filter", "Part B", "safety", "machine", "surface", "1030 mm", "accuracy", "operator", "A Weight", "accurate", "BS EN ISO", "detection", "toys test", "butane gas", "wide range", "propane gas", "test method", "test result", "small flame", "micro-switch", "large screen", "timing range", "burner covers", "toy materials", "automatic gas", "edge ignition", "ignition time", "Specifications", "solenoid valve", "Easy-set device", "reliable timing", "burner position", "Automatic change", "70 Kg Dimensions", "110 V 50/60 Hz", "flame application", "vertical test frame", "different standards", "Optional test frame", "Detachable controller", "test debris Standards", "toys flammability test", "Programmable PLC system", "other similar standards", "marker threads mounting", "flammability resistance", "Interchangeable Burners", "Automatic flame ignition", "optical scanning devices", "fast, infrared detectors", "vertical oriented fabric", "Large graphic touch panel", "horizontal marker threads", "changeable specimen holders", "most vertical oriented tests", "vertical oriented textile fabrics", "MFT Multi Purpose Flammability Tester", "interchangeable, precision Test Frames", "MFT/Multi Purpose Flammability Tester Application" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 116, "imageuri": "https://productimages.withfloats.com/actual/65afb31c7f23e43eeb7c2504.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/65afb31c7f23e43eeb7c2504.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-01-23T12:37:45.365Z", "updatedon": "2024-01-23T12:37:45.365Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/mft-multi-purpose-flammability-tester/116", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "textile testing", "tags": [ "MFT", "FT" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "659552f74c1d0610285da302", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Automatic Digital Pull Off Adhesion Tester", "description": "Application\nOur APT/ Automatic Digital Pull Off Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n Dolly Size ： 20mm（Standard）；10mm、14mm、50mm（Optional）\n\tResolution ： 0.01MPa（1psi）\n\tAccuracy ： ±1% Full scale \n\tMax. Pull-off Pressure : \no\tΦ10mm dolly →0~80 MPa；(Optional) \no\tΦ14mm dolly→0~40 MPa；(Optional)\no\tΦ20mm dolly→0~20 MPa；(Standard)\no\tΦ50mm dolly→0.2~3.2 MPa；(Optional)\nAccessories:\n• 20mm Aluminum test dollies (20 pcs)\n• Cutting toll for 20mm dollies, \n• 3M Adhesive and glue gun \n• Micro-USB cable\n• Carrying case\n\nPower: Built-in rechargeable lithium battery with standard charging adapter.\nWeight: 4-5 Kg\t \nDimensions: 360 x 75 x 115 mm(LxWxH)\n\nDifferent Types of Pull off Adhesion Test Method for testing\n\nTesting coating adhesion is crucial to ensure the durability and performance of coatings on various surfaces. Several national and international organizations have established test methods to assess coating adhesion. Here are some widely recognized standards:\n\nInternational Test Standards:\nASTM (American Society for Testing and Materials):\n\nASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test:\nThis method evaluates the adhesion of a coating by applying and removing pressure-sensitive tape on the coated surface.\n\nASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers:\nIt measures the tensile adhesion strength of a coating by applying a force perpendicular to the surface.\n\nASTM D7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Tester. \nTo assess the bond strength between a coating and a concrete substrate. The test involves applying a tensile force to a coating using a portable pull-off adhesion tester until the coating detaches from the concrete surface. The force required for detachment is then measured and used to determine the adhesion strength of the coating.\n\nISO (International Organization for Standardization):\n\nISO 4624 Paints and Varnishes – Pull-Off Test for Adhesion\nThis standard provides a method for assessing the adhesion strength of a coating on a substrate. The pull-off test involves applying a tensile force to a coating perpendicular to the substrate using a specific adhesion tester until the coating is detached.\n\nISO 2409 - Paints and Varnishes - Cross-Cut Test:\nThis standard provides a method for assessing the resistance of paint coatings to separation from substrates using a cross-cut pattern.\n\nISO 16276-1 - Corrosion Protection of Steel Structures by Protective Paint Systems - Assessment of, and Specifications for, the Adhesion of Coatings:\nIt specifies a method for assessing the adhesion of coatings to metallic substrates.\n\nSSPC (The Society for Protective Coatings):\n\nSSPC-PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements:\n\nWhile not exclusively for adhesion, it involves checking the adhesion of a coating by making a series of cuts through the coating to the substrate.\n\nBSI (British Standards Institution):\n\nBS EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nThis standard specifies a method for assessing the pull-off strength of a coating using a portable adhesion tester.\n\nJIS (Japanese Industrial Standards):\n\nJIS K 5600-5-6 - Testing Methods for Paints - Part 5: Mechanical Properties of Film - Section 6: Adhesion Test - Cross-Cut Test:\nIt is similar to ISO 2409 and involves making cuts in the coating to assess adhesion.\n\nDIN (Deutsches Institut für Normung - German Institute for Standardization):\n\nDIN EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nSimilar to the ISO standard, this DIN standard specifies a method for assessing pull-off strength.\n\nWhen performing coating adhesion tests, it is essential to follow the specific procedures outlined in these standards to ensure accurate and reproducible results. Additionally, standards may be updated, so it's advisable to check for the latest revisions and editions of the standards relevant to your specific needs.", "price": 392680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "75", "pcs", "0.0", "50mm", "toll", "films", "types", "Φ20mm", "LxWxH", "Weight", "20 MPa", "40 MPa", "115 mm", "system", "80 MPa", "mortars", "3.2 MPa", "Accuracy", "glue gun", "plasters", "substrate", "adhesives", "laminates", "Resolution", "Dolly Size", "Full scale", "Accessories", "Φ10mm dolly", "3M Adhesive", "digital LCD", "20mm dollies", "test diameter", "weakest plane", "concrete coats", "Specifications", "Micro-USB cable", "breaking points", "other materials", "unique instrument", "pull-off strength", "fractured surfaces", "hydraulic pressure", "Carrying case Power", "bond strength testing", "4-5 Kg Dimensions", "Max. Pull-off Pressure", "metals plastic coatings", "adhesive, coating layers", "standard charging adapter", "20mm Aluminum test dollies", "Adhesion Tester Application", "rechargeable lithium battery", "greatest tensile pull-off force", "portable, hand-operated instrument", "APT/ Automatic Digital Pull Off Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 110, "imageuri": "https://productimages.withfloats.com/actual/65a90b77dc543eef6733ec40.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65a90b77dc543eef6733ec40.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-01-03T12:28:39.224Z", "updatedon": "2024-02-21T04:04:04.504Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/automatic-digital-pull-off-adhesion-tester/110", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Tiles Tester", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }