Home> Products> fabric tensile strength

{ "products": [ { "_id": "5b6b38c4dd80b30515ff7406", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Snap Tester", "description": "Application\nSnap Tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available).\nSnap tester Consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation.\nThe snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, The operator can apply a specific force and the holding force or the breaking strength can be recorded. The capability of Snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.\nRelated testers(optional order)\nThe detachment of a snap or other part may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended, such as: Small Parts Cylinder, Sharp Point Tester, Sharp Edge Tester, Button Impact Tester, etc.\n\nIncluded Accessories\nSANDOO Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) - 1 Pc\nLower Fabric Clamp, Lever Armlocking - 1 Pc\nUpper Stud Clamp - 1 Pc\nUpper Snap Clamp -1 Pc\nThree Pronged Clamp - 1 Pc\nTwo Pronged Clamp with screw - 1 Pc\nLower Grasp Button Kit - 1 Pc\nLong Nose Vise Grip - 1 Pc\nCalibration: 15 lbs Calibration Weight- 1 Pc\nSafety Goggles - 1 Pc\nRubber Ring - 5 Pcs\nCalibration Certificate - 1 Pc\nOperation Manual - 1 Pc\nStandards ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A\n\nWeight 45 Kg\nDimensions 230 x 280 x 750 mm(L x W x H)\n\nSnap Tester Manufacturer \nSnap Tester Supplier \nSnap Tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "FS", "LxWxH", "Snaps", "Toggles", "D Rings", "M S P115A", "Item Code", "ASTM F963", "Clamp 1 Pc", "hand wheel", "Rubber Ring", "fine control", "Hole Buttons", "Jean Buttons", "Resolution 2N", "small samples", "Pronged Clamp", "snap component", "specific force", "Safety Goggles", "Nose Vise Grip", "tensile testing", "upper snap clamp", "Operation Manual", "Lever Armlocking", "Push Pull Tester", "Upper Stud Clamp", " optional order ", "breaking strength", "Sharp Edge Tester", "broken small parts", "Sharp Point Tester", "Lower Grasp Button", "sharp edge testing", "SANDOO Force Gauge", "lower fabric clamp", "special attachments", "Small Parts Cylinder", "convenient operation", "Button Impact Tester", "Garments Accessories", "Standards ASTM PS79 96", "lbs Calibration Weight", "Additional Information", "Snap Tester Application", "Calibration Certificate", "prong ring attached snap", "additional testing equipment" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/5993dd2d72d9ce0a90ca8fbe.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5993dd2d72d9ce0a90ca8fbe.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-08-16T05:50:36.922Z", "updatedon": "2021-04-22T07:04:59.996Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/snap-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "", "tags": [ "Snap Tester Manufacturer", "Snap Tester Supplier", "Snap Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6705231425175ea16a2f049c", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Digital Pull Off Adhesion Tester", "description": "Our DPT/S Digital Pull Off Adhesion Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials.\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\nStandards : EN ISO 13433\n\nPower\t: Built-in rechargeable lithium battery with standard charging adapter\nWeight\t: 7.5 Kg.\nDimensions\t: 441 x 149 x130 mm(LxWxH)\n", "price": 140500.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "7.5 Kg", "EN ISO", "digital LCD", "weakest plane", "test diameter", "concrete coats", "Adhesion Tester", "breaking points", "other materials", "unique instrument", "pull-off strength", "hydraulic pressure", "fractured surfaces", "DPT/S Digital Pull", "bond strength testing", "metals plastic coatings", "adhesive, coating layers", "rechargeable lithium battery", "greatest tensile pull-off force", "standard charging adapter Weight", "portable, hand-operated instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 136, "imageuri": "https://productimages.withfloats.com/actual/67052316c3533fe8fd31f8c1.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/67052316c3533fe8fd31f8c1.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-08T12:18:28.463Z", "updatedon": "2024-10-08T12:18:28.463Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/-digital-pull-off-adhesion-tester/136", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "DPT/S", "tags": [ "DPT/S Digital Pull Off Adhesion Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "659552f74c1d0610285da302", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Automatic Digital Pull Off Adhesion Tester", "description": "Application\nOur APT/ Automatic Digital Pull Off Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n Dolly Size ： 20mm（Standard）；10mm、14mm、50mm（Optional）\n\tResolution ： 0.01MPa（1psi）\n\tAccuracy ： ±1% Full scale \n\tMax. Pull-off Pressure : \no\tΦ10mm dolly →0~80 MPa；(Optional) \no\tΦ14mm dolly→0~40 MPa；(Optional)\no\tΦ20mm dolly→0~20 MPa；(Standard)\no\tΦ50mm dolly→0.2~3.2 MPa；(Optional)\nAccessories:\n• 20mm Aluminum test dollies (20 pcs)\n• Cutting toll for 20mm dollies, \n• 3M Adhesive and glue gun \n• Micro-USB cable\n• Carrying case\n\nPower: Built-in rechargeable lithium battery with standard charging adapter.\nWeight: 4-5 Kg\t \nDimensions: 360 x 75 x 115 mm(LxWxH)\n\nDifferent Types of Pull off Adhesion Test Method for testing\n\nTesting coating adhesion is crucial to ensure the durability and performance of coatings on various surfaces. Several national and international organizations have established test methods to assess coating adhesion. Here are some widely recognized standards:\n\nInternational Test Standards:\nASTM (American Society for Testing and Materials):\n\nASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test:\nThis method evaluates the adhesion of a coating by applying and removing pressure-sensitive tape on the coated surface.\n\nASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers:\nIt measures the tensile adhesion strength of a coating by applying a force perpendicular to the surface.\n\nASTM D7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Tester. \nTo assess the bond strength between a coating and a concrete substrate. The test involves applying a tensile force to a coating using a portable pull-off adhesion tester until the coating detaches from the concrete surface. The force required for detachment is then measured and used to determine the adhesion strength of the coating.\n\nISO (International Organization for Standardization):\n\nISO 4624 Paints and Varnishes – Pull-Off Test for Adhesion\nThis standard provides a method for assessing the adhesion strength of a coating on a substrate. The pull-off test involves applying a tensile force to a coating perpendicular to the substrate using a specific adhesion tester until the coating is detached.\n\nISO 2409 - Paints and Varnishes - Cross-Cut Test:\nThis standard provides a method for assessing the resistance of paint coatings to separation from substrates using a cross-cut pattern.\n\nISO 16276-1 - Corrosion Protection of Steel Structures by Protective Paint Systems - Assessment of, and Specifications for, the Adhesion of Coatings:\nIt specifies a method for assessing the adhesion of coatings to metallic substrates.\n\nSSPC (The Society for Protective Coatings):\n\nSSPC-PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements:\n\nWhile not exclusively for adhesion, it involves checking the adhesion of a coating by making a series of cuts through the coating to the substrate.\n\nBSI (British Standards Institution):\n\nBS EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nThis standard specifies a method for assessing the pull-off strength of a coating using a portable adhesion tester.\n\nJIS (Japanese Industrial Standards):\n\nJIS K 5600-5-6 - Testing Methods for Paints - Part 5: Mechanical Properties of Film - Section 6: Adhesion Test - Cross-Cut Test:\nIt is similar to ISO 2409 and involves making cuts in the coating to assess adhesion.\n\nDIN (Deutsches Institut für Normung - German Institute for Standardization):\n\nDIN EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nSimilar to the ISO standard, this DIN standard specifies a method for assessing pull-off strength.\n\nWhen performing coating adhesion tests, it is essential to follow the specific procedures outlined in these standards to ensure accurate and reproducible results. Additionally, standards may be updated, so it's advisable to check for the latest revisions and editions of the standards relevant to your specific needs.", "price": 392680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "75", "pcs", "0.0", "50mm", "toll", "films", "types", "Φ20mm", "LxWxH", "Weight", "20 MPa", "40 MPa", "115 mm", "system", "80 MPa", "mortars", "3.2 MPa", "Accuracy", "glue gun", "plasters", "substrate", "adhesives", "laminates", "Resolution", "Dolly Size", "Full scale", "Accessories", "Φ10mm dolly", "3M Adhesive", "digital LCD", "20mm dollies", "test diameter", "weakest plane", "concrete coats", "Specifications", "Micro-USB cable", "breaking points", "other materials", "unique instrument", "pull-off strength", "fractured surfaces", "hydraulic pressure", "Carrying case Power", "bond strength testing", "4-5 Kg Dimensions", "Max. Pull-off Pressure", "metals plastic coatings", "adhesive, coating layers", "standard charging adapter", "20mm Aluminum test dollies", "Adhesion Tester Application", "rechargeable lithium battery", "greatest tensile pull-off force", "portable, hand-operated instrument", "APT/ Automatic Digital Pull Off Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 110, "imageuri": "https://productimages.withfloats.com/actual/65a90b77dc543eef6733ec40.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65a90b77dc543eef6733ec40.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-01-03T12:28:39.224Z", "updatedon": "2024-02-21T04:04:04.504Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/automatic-digital-pull-off-adhesion-tester/110", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Tiles Tester", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "61979913e979920001bb7b01", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Digital Pull Off adhesion Tester", "description": "Digital Pull Off Adhesion Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n\tDolly Size\t： 20mm（Standard）；10mm、14mm、50mm（Optional）\n\tResolution\t： 0.01MPa（1psi）\n\tAccuracy\t： ±1% Full scale\n\tMax. Pull-off Pressure : \no\tΦ10mm dolly →0-80 MPa；(Optional)\no\tΦ14mm dolly→0-40 MPa；(Optional)\no\tΦ20mm dolly→0-20 MPa；(Standard)\no\tΦ50mm dolly→0-3.5 MPa；(Optional)\nPower\t: Built-in rechargeable lithium battery with standard charging adapter.\nWeight\t: 3 Kg\t \nDimensions\t: 360 x 75 x 115 mm(LxWxH)\n\nDifferent Types of Pull off Adhesion Test Method for testing\n\nTesting coating adhesion is crucial to ensure the durability and performance of coatings on various surfaces. Several national and international organizations have established test methods to assess coating adhesion. Here are some widely recognized standards:\n\nInternational Test Standards:\nASTM (American Society for Testing and Materials):\n\nASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test:\nThis method evaluates the adhesion of a coating by applying and removing pressure-sensitive tape on the coated surface.\n\nASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers:\nIt measures the tensile adhesion strength of a coating by applying a force perpendicular to the surface.\n\nASTM D7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Tester. \nTo assess the bond strength between a coating and a concrete substrate. The test involves applying a tensile force to a coating using a portable pull-off adhesion tester until the coating detaches from the concrete surface. The force required for detachment is then measured and used to determine the adhesion strength of the coating.\n\nISO (International Organization for Standardization):\n\nISO 4624 Paints and Varnishes – Pull-Off Test for Adhesion\nThis standard provides a method for assessing the adhesion strength of a coating on a substrate. The pull-off test involves applying a tensile force to a coating perpendicular to the substrate using a specific adhesion tester until the coating is detached.\n\nISO 2409 - Paints and Varnishes - Cross-Cut Test:\nThis standard provides a method for assessing the resistance of paint coatings to separation from substrates using a cross-cut pattern.\n\nISO 16276-1 - Corrosion Protection of Steel Structures by Protective Paint Systems - Assessment of, and Specifications for, the Adhesion of Coatings:\nIt specifies a method for assessing the adhesion of coatings to metallic substrates.\n\nSSPC (The Society for Protective Coatings):\n\nSSPC-PA 2 - Procedure for Determining Conformance to Dry Coating Thickness Requirements:\n\nWhile not exclusively for adhesion, it involves checking the adhesion of a coating by making a series of cuts through the coating to the substrate.\n\nBSI (British Standards Institution):\n\nBS EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nThis standard specifies a method for assessing the pull-off strength of a coating using a portable adhesion tester.\n\nJIS (Japanese Industrial Standards):\n\nJIS K 5600-5-6 - Testing Methods for Paints - Part 5: Mechanical Properties of Film - Section 6: Adhesion Test - Cross-Cut Test:\nIt is similar to ISO 2409 and involves making cuts in the coating to assess adhesion.\n\nDIN (Deutsches Institut für Normung - German Institute for Standardization):\n\nDIN EN ISO 4624 - Paints and Varnishes - Pull-off Test for Adhesion:\nSimilar to the ISO standard, this DIN standard specifies a method for assessing pull-off strength.\n\nWhen performing coating adhesion tests, it is essential to follow the specific procedures outlined in these standards to ensure accurate and reproducible results. Additionally, standards may be updated, so it's advisable to check for the latest revisions and editions of the standards relevant to your specific needs.\n", "price": 162680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "75", "Max", "50mm", "Power", "Φ20mm", "films", "types", "LxWxH", "115 mm", "Weight", "system", "80 MPa", "3.5 MPa", "mortars", "plasters", "Accuracy", "substrate", "specified", "adhesives", "laminates", "Resolution", "Dolly Size", "digital LCD", "Φ10mm dolly", "Digital Pull", "test diameter", "weakest plane", "±1% Full scale", "Specifications", "concrete coats", "breaking points", "adhesion Tester", "other materials", "Pull-off Pressure", "unique instrument", "pull-off strength", "hydraulic pressure", "fractured surfaces", "bond strength testing", "3 Kg\t \nDimensions", "metals plastic coatings", "adhesive, coating layers", "standard charging adapter", "rechargeable lithium battery", "greatest tensile pull-off force", "portable, hand-operated instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 103, "imageuri": "https://productimages.withfloats.com/actual/61979915e1109e000198422d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/61979915e1109e000198422d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-11-19T12:31:15.401Z", "updatedon": "2024-02-21T04:04:27.644Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/digital-pull-off-adhesion-tester/103", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Digital Pull Off Adhesion Tester", "tags": [ "Adhesive Tester,", "Digital Pull-Off Adhesion Tester,", "Elcometer 506 Pull-Off Adhesion Tester,", "Adhesion Instrument,", "Adhesive Tester - Best Manufacturer in India,", "pull-off adhesion tester price,", "pull-off adhesion tester price in india,", "elcometer 506 pull-off adhesion tester price,", "", "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "5e195cca34181a000141c13b", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Manual Wire Crimp Pull Strength Tester", "description": "It is an unique& economic instrument for tension/compression testing with good stability,wide application and convenient usage for manual operation. It is used for various application such as breaking strength, compression and tensile testing of Metal wire, crimp, Plastic Strip, HDPE Tape, yarn, strips & many more.Digital Force measurement devices is attached to measure the maximum breaking force in N, Kgf & Lbf..\n\nFeatures:\n\nSimple & Hand Pressure operation,\nAble to be used with various kinds of fixtures.\nCompact design & Simple construction.\n\n Specification:\n\nCapacity : 500N (50Kg)\nAccuracy : 0.1N / 0.01kg / 0.02lb;\nUnits : N, Kgf, Lbf\nTraveling Length : 200mm\nData Output : RS232 communications\nPower/Air : 220 /110 V 50/60 Hz \nWeight : 20 Kg \nDimensions : 450 x 400 x 700 mm(L x W x H)\n\ncrimp terminal, pull tester, pull off tester, wire testers\n\nManual Wire Crimp Pull Strength Tester Manufacturer \nManual Wire Crimp Pull Strength Tester Supplier \nManual Wire Crimp Pull Strength Tester Exporter\ntesting machines and equipments\n\ntesting machines and equipments manufacturer\n\ntesting equipment manufacturers in india\n\ntesting equipment manufacturers importers in india\n\nTextile Testing Instruments manufacturers India\n\nelectrical testing instruments manufacturers india", "price": 92680.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 94, "imageuri": "https://productimages.withfloats.com/actual/5e195ccacb69380001427f3a.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5e195ccacb69380001427f3a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-01-11T05:27:38.401Z", "updatedon": "2021-08-14T16:44:31.537Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/manual-wire-crimp-pull-strength-tester/94", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Manual Wire Crimp Pull Strength Tester", "tags": [ "Wire Crimp Pull Tester", "Wire Pull Tester", "Manual Wire Crimp Pull Tester", "Manual Wire Crimp Pull Strength Tester Manufacture", "Manual Wire Crimp Pull Strength Tester Supplier", "Manual Wire Crimp Pull Strength Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5e1956dceeb21200016f183c", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Digital Pull Off Adhesion Tester", "description": "Application\n\nOur Digital Pull Off Tester is unique instrument for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals plastic coatings, concrete coats, and mortars and plasters and other materials. \n\nIt is portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating's strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching, breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.\n\nSpecifications:\n\nDolly Size : 20mm (Standard); 10mm,14mm,50mm (Optional)\nResolution : 0.01MPa (1psi)\nAccuracy : ±1% Full scale \nMax. Pull-off Pressure : \nØ 10mm dolly→0~80 MPa; (Optional)\nØ 14mm dolly→0~40 MPa; (Optional)\nØ 20mm dolly→0~20 MPa; (Standard)\nØ 50mm dolly→0.2~3.2 MPa; (Optional)\n\nAccessories:\n\n20mm Aluminum test dollies (20 pcs)\nCutting toll for 20mm dollies, \n3M Adhesive and glue gun \nMicro-USB cable\nCarrying case\n\nPower: Built-in rechargeable lithium battery with standard charging adapter.\nWeight: 4-5 Kg \nDimensions: 360 x 75 x 115 mm(L x W x H)\n\nPull Off Adhesion Tester Manufacturer \nPull Off Adhesion Tester Supplier \nPull Off Adhesion Tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 93, "imageuri": "https://productimages.withfloats.com/actual/5e195793cab1fe0001e5941d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5e195793cab1fe0001e5941d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-01-11T05:02:20.794Z", "updatedon": "2023-08-28T07:01:55.529Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/digital-pull-off-adhesion-tester/93", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "Digital Pull Off Adhesion Tester", "tags": [ "Pull Off Adhesion Tester", "Adhesion Tester", "Digital Pull Off Adhesion Tester", "Pull Off Adhesion Tester Manufacturer", "Pull Off Adhesion Tester Supplier", "Pull Off Adhesion Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5e194c3e7276480001b84391", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Peel Adhesion Tester", "description": "Our Manual Peel Adhesion Strength Tester is unique & economic instrument for tension/compression testing with good stability, wide application and convenient usage for manual operation. It is used for various application such as Peeling, breaking strength, Adhesion Testing, Peel off, compression and tensile testing of Fabric, plastic, wire, crimp,yarn, strips & many more. Digital Force measurement devices are attached to measure the maximum Peel adhesive Strength & breaking force in N, Kgf &Lbf.\n\nFeatures:\n\nSimple & Hand Pressure operation,\nAble to be used with various kinds of fixtures.\nCompact design & Simple construction.\n \n\nSpecifications:\n\nCapacity : 100N (10Kg) / 500N (50.0Kg)\nAccuracy : 0.1N / 0.01kg / 0.02lb;\nUnits : N, Kgf, Lbf\nTraveling Length : 200mm / 400mm(Optional)\nData Output : RS232 communications\n \nPower/Air : 220/110 V 50/60 Hz \n\nWeight : 20 Kg Dimensions : 450 x 400 x 700 mm(LxWxH)\n \n\npeel adhesion tester, peeling strength tester, adhesive strength tester\nPeel Adhesion Tester Manufacturer \nPeel Adhesion Tester Supplier \nPeel Adhesion Tester Exporter", "price": 80000.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 90, "imageuri": "https://productimages.withfloats.com/actual/5e194e8ee6d61a0001c12f0c.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5e194e8ee6d61a0001c12f0c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-01-11T04:17:02.877Z", "updatedon": "2021-04-22T05:52:27.078Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/peel-adhesion-tester/90", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "peel", "tags": [ "", "Lab Testing Instruments", "peel adhesion tester", "Adhesive Strength Tester", "90 degree peel adhesion tester", "Peel Adhesion Tester Manufacturer", "Peel Adhesion Tester Supplier", "Peel Adhesion Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5e186a98781f220001151f14", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Wire Crimp Force Tester", "description": "Our Wire Crimp Force Tester is unique & economic instrument for tension/compression testing with good stability, wide application and convenient usage for manual operation. It is used for various application such as force tester, breaking strength,crimp force Testing, Peel off, compression and tensile testing of Fabric, plastic, wire, crimp,yarn, strips & many more. Digital Force measurement devices are attached to measure the maximum Peel adhesive Strength & breaking force in N, Kgf &Lbf.\n\n \n\nFeatures:\n\nSimple & Hand Pressure operation,\nAble to be used with various kinds of fixtures.\nCompact design & Simple construction.\n \n\nSpecifications:\n\nCapacity : 100N (10Kg) / 500N (50.0Kg)\nAccuracy : 0.1N / 0.01kg / 0.02lb;\nUnits : N, Kgf, Lbf\nTraveling Length : 200mm / 400mm(Optional)\nData Output : RS232 communications\n \n\nPower/Air : 220/110 V 50/60 Hz \n\nWeight : 20 Kg Dimensions : 450 x 400 x 700 mm(L x W x H)\n\nWire Crimp Force Tester Manufacturer \nWire Crimp Force Tester Supplier \nWire Crimp Force Tester Exporter", "price": 80000.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 88, "imageuri": "https://productimages.withfloats.com/actual/5e186a98cbcd9200015de74e.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5e186a98cbcd9200015de74e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-01-10T12:14:16.261Z", "updatedon": "2021-04-22T09:36:39.447Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/wire-crimp-force-tester/88", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Apple Electroniks", "category": "wire", "tags": [ "crimp tester", "wire crimp pull tester", "Wire Terminal Testers", "Motorized Crimp Teste", "Wire Crimp Force Tester Manufacturer", "Wire Crimp Force Tester Supplier", "Wire Crimp Force Tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5bc6c3dd08ddfa0001b2f753", "fptag": "APPLEELECTRONIKS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Elmendorf tear tester", "description": "elmendorf tear tester\n\nTo determine the ballistic tearing strength of textiles, plastics, paper or board by falling-pendulum instrument. Automatic specimen clamping and notching is added advantage while testing & even repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid any slipping phenomena. Further, Automatic compensation for friction and levelling errors, so no friction, alignment and maintenance problems.\n\nIt enables rapid determination of the dynamic resistance of materials designed to be subjected to strong shearing loads (e.g. fabrics). Subsequently, the test was naturally adopted for all materials in the form of sheet or films, cardboards, cloth, knitted fabrics, plastic films, aluminium foil, non-woven fabrics, complex flexible packaging etc. It conforms to the all known test Standards i.e. as per ASTM D1424/5734, ISO 1974/9290, BS ISO 13937, BS 3424/4253/4468, DIN 53862/53128, NEXT 17, M&S P29, INDA IST 100.1, AFNOR G 07-149 & more more…\n\nOwing to perfection and quality oriented approach, we have carved niche in the industry by offering an enormous grade assortment of Textile Testing Machine. This machine is available in varied specifications to fulfil the wide demands of the textile industry. The offered machine is availed in varied sizes and other related specifications, to meet needs of our esteemed clients. Clients can avail the Textile Testing Machine from us at market leading rates.\n\nWe are leading manufacturer & Supplier of Elmendorf tear tester in India. \n\n| latest elmendorf tear tester | elmendorf tear tester in Vadodara |elmendorf tear tester in Gujarat | best elmendorf tear tester | best supplier for elmendorf tear tester | manufacturer elmendorf tear tester | supplier for elmendorf tear tester| best selling elmendorf tear tester in India | \n\nView more at: http://www.appleelectroniks.com/computerized-elmendorf-tear-tester-3767343.html or send us your inquiry at our email appleasia99@gmail.com\n\nElmendorf tear tester Manufacturer \nElmendorf tear tester Supplier \nElmendorf tear tester Exporter", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 85, "imageuri": "https://productimages.withfloats.com/actual/5bc6c5454c9cf000012c2f87.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5bc6c5454c9cf000012c2f87.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-10-17T05:08:45.244Z", "updatedon": "2021-04-22T05:55:51.916Z", "buyonlinelink": null, "producturl": "http://WWW.APPLEELECTRONIKS.NET/products/elmendorf-tear-tester/85", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "elmendorf tear tester", "tags": [ "elmendorf tear tester", "elmendorf tear tester price", "elmendorf tear tester manual", "elmendorf tear tester procedure", "elmendorf tear tester manufacturers", "elmendorf tear tester calculation", "elmendorf tear tester calibration", "elmendorf tear test formula", "how to use elmendorf tear tester", "calibration of elmendorf tear tester", "how to calibrate elmendorf tear tester", "elmendorf tear test results", "elmendorf tear test units", "elmendorf tear test procedure", "Elmendorf tear tester Manufacturer", "Elmendorf tear tester Supplier", "Elmendorf tear tester Exporter" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "5d08ebb2edf0e25c3b8da5c2", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }